GUITAR-JO is an electric guitar accessory that makes your guitar sound like a banjo. Six individual dampeners are lowered so that they gently touch the strings; that contact with the strings gives your guitar a banjo twang. HOW IT STARTED: The creator, Jon Langberg, wanted a banjo sound for a song he was doing for a musical performance. He didn’t want to buy a banjo and learn it, so he tried to find digital guitar effects, which he soon found fell drastically short. Jon discovered that dampening guitar strings using a cloth produced a sound similar to a banjo. However, the results were inconsistent, with the cloth often falling out of place while playing. He designed and built a plexiglass dampening device that attached to his guitar with suction cups. The plexiglass contained Velcro® on its underside, which could be lowered onto the strings (or raised if too much pressure was applied). It produced a sound that was much more consistent with that of a real banjo. It was developed over time to a 6-pad device to allow for more individual control. The device now attaches using microsuction material, which does not leave any sticky residue.
SMASHmouse started by solving a problem that all musicians know all too well. More than ever, musicians are using technology to learn, play, record and perform music. But we all have the same problem: if you use both hands to play the instrument, how do you control your technology? Certainly not very well, if at all, until now. Say hello to SMASHmouse. Now you can Kick It to Click It and keep on playing!
OzGuitarWorks was formed to bring a new headless guitar into the world. "The Tau-6" Compact, Light, Comfortable Quick Change PickUp Module Strt Neck Heel Shape Aluminum, Carbon Fiber, Tonewood Body Plug and Play, Find your Sound - Pickup type, location, and angle - Module wood type and structure - Neck wood, scalelength Scale length std. 25 ½” (S type), opt. 24 ¾” (G like) and 28- 5/8” Baritone Weight ~ 3.5 lbs , 1.6kg (depending on pickups and neck woods) Total Length = 29.5” (for 25.5 scale), Max Width = 5.38” Body materials Aluminum, Carbon Fiber; pickup module Ash* Pickguard Carbon Fiber Pickups Alumitone std.* Individual piezo bridge saddles .413”, 10.5mm spacing String break angles; 14 deg at nut, 20deg at saddle * options available We are committed to quality manufacture in the USA, and at a great performance/price ratio.
WE ONLY MAKE REAL TIMBER / WOOD PICKGUARDS – NO UNFINISHED VENEERS GLUED TO PLASTIC We produce a range of unique 100% timber pickguards for most models of Fender Strats and Teles, other makes available also…. Give your guitar that visual lift you’ve always wanted – and be amazed at the tonal increase too – complete the ‘tone circle’ by mounting your pickups on a FULL 100% TIMBER pickguard, with a beautiful Maple top. Nowhere else will you get the quality of finish and meticulous attention to detail as in our products – a result of forty years of craftsmanship. Multiple coated in 2-Pak HIGH GLOSS and polished to a level that will enhance any instrument. Quilted, Figured or Birdseye Maple pickguards for Strat and Tele always available, both modern and vintage, Thinline and Deluxe. Bass types also, Jazz and Precision… other guitar/bass styles also, Music Man, PRS etc… Why buy anything else or lesser quality when you can have REAL MAPLE . . ??
The Trinalog Effects Station is a compact analog multi-effect system that takes the pain out of your pedalboard. Through careful miniaturization, we’ve created an analog pedalboard that is small enough to fit in your backpack, but still has all of the flexibility and character of a traditional system! We’ve achieved this by shrinking your favorite tones into pocket-sized analog cartridges which plug directly into our base station. Once your effect cartridges are inserted, you can route your signal through them in any way you want using our Bluetooth mobile app. Found a tone you love? No need to memorize half a dozen knob positions… Just save your tone directly to the base station for quick preset recall on stage, or upload it to Tone Hub™, our online community where you can share your creations and explore hundreds of community presets. Have a favorite pedal you’d hate to leave behind? No worries, you can integrate it into your Trinalog Effects Station using the built-in effects loop! Take the pain out of your pedalboard with the Trinalog Effects Station!
P3 External Kit 10-piece kit comprised of the "Power Station" power supply, which is placed at, or near the amplifier, and the "Power Splitter", which is placed with the other pedals on a pedalboard. The P3 External Kit allows a guitarist/musician to use P3 Technology without modifying their existing amp or pedals, and will operate with P3 Ready gear, allowing a player to integrate P3 Ready gear into their rig to progressively move to an all P3 Ready setup. Either of the two pieces contained in the kit is available for purchase separately, as some people with P3 Enabled amps may need only the Power Splitter. Benefits Remote, phantom power for pedals and pickups Eliminates need for 9-volt batteries Uses standard "stereo" cabling (provided) Eliminates power cabling, slashes pedalboard clutter Eliminates wall-warts, AC power at pedalboard Reduces or eliminates ground-loop hum Stabilizes tone, stops signal fade and dropout Ends the dreaded "dead on arrival" Easily make any setup fully P3 Ready No modifications necessary, works with practically everything
Our brand of electric guitars “Pons Guitars” has revolutionized the world of music with a great innovation: the possibility of having all the guitars you always dreamed of in just one. With us it is possible to play with the Les Paul from Slash (Guns'n'Roses), the Explorer of James Hetfield (Metallica), the SG of Angus Young (AC / DC) or the Telecaster of Keith Richards (Rolling Stones) for example, at a reasonable price changing the bodies in less than 20 seconds. At “Pons” you will find an expert guitarists range –Pons Stage- and a beginners range –Pons Studio-. In addition, for each range we have two differentiated models with different technical characteristics: the Jan model and the Pol model.
Features And Benefits Drop in for all Kahler upgrades (Hybrid® X-Trem®) (2 in 1) tremolo can be locked into a fixed bridge Top routing only, NO REAR ROUTING Top spring tension adjuster Cam and Ball Bearing Drive Right and Left Handed with arm tension clutches Fine tuning 2 steps + SIX (6) WAY ADJUSTABLE SADDLE sets for custom set-ups: Custom String Spacing Left-Right Intonation: In – Out Height adjustment: Up – Down to match neck/fret radius for customized string action. Custom saddles for 7-8-9-10 string Extra wide brass roller Extra wide string hook INCLUDED (NOT SHOWN): ARM, KNOB, WRENCHES, ALL MOUNTING GEAR STRING LOCKS AND LOCKING NUTS SOLD SEPARATELY Available in Bright Chrome, Black Krome, or Gold.
The Amp Stand Guitarist Magazine (UK) Calls "A Stroke Of Genius!" Features of the Standback Lightweight and durable - Weighs less than a pound, and new 'ribbed' design will support amps up to 100 lbs. Amp stays on floor maintaining your low end (Coupling effect) Folds flat to fit in your gig bag or in the back of most amps Adjustable amp angle
Discover A World Of New Guitar Sounds and Playing Techniques. Meet the Guitar Triller, a new hand-held accessory for guitar and bass players, carefully designed for striking strings in a powerful and expressive way. With three different playing positions and dozens of useful techniques, the Guitar Triller goes beyond picks and fingers to introduce entirely new sounds to your music. The Guitar Triller is built on the foundation of control, comfort, and functionality to give you a world of new creative possibilities. We made the Guitar Triller to show you how awesome string striking can be when you use something that’s perfectly designed for the job. We considered everything from ergonomics to string tension and guitar mechanics to put these amazing sounds at your fingertips with one innovative accessory. Add a Guitar Triller to your creative toolbox and discover a brand new set of sounds.